The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.     

“网格式平行线法”在螺纹参数测量中的应用

在计算机视觉理论基础上发展起来的视觉检测(vision inspection)技术具有非接触、速度快、精度适中、可实现在线等优点，已广泛地应用于工业产品的在线检测。在计算机视觉检测技术中CCD摄像机是一个最关键的器件，其参数是否准确决定了检测的精度。所以，摄像机标定是视觉检测技术中最基本的也是最重要的一步。在比较其他标定方法的基础上，为了解决传统标定方法对螺纹图像测量系统所带来的一系列问题，采用了一种新的图像测量系统的标定方法——网格式平行线标定方法，该方法运用了CCD亚像素细分技术及调焦技术，可直接得到纵横2个方向的像素，经过理论分析及实验结果均表明，采用该方法具有标定简单、精度高、重复性好等优点，是一种较好的螺纹图像测量系统标定方法。     

The Nonexistence of Procedures with Bounded Performance Characteristics in Certain Parametric Inference Problems

This paper gives a condition which implies the nonexistence of parametric statistical procedures with bounded risk or error performance characteristics. Many examples for which such a condition is satisfied are considered.     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

基于特征圆单目视觉的飞机舵面角位移标定技术

提出了一种基于特征圆单目视觉的非接触式飞机舵面角位移标定技术。用一台数码摄像机对固定在飞机舵面上的特征圆进行拍照,经数字图像处理后确定五个特征点的坐标,利用针孔成像和射影变换原理建立物像空间坐标解算模型,计算出特征圆的法线相对方向和圆心的相对位置,舵面角位移由该圆的法线方向确定。仿真结果表明,该方法具有标定过程简单、实时、快速和准确的特点,标定精度可达到0.1°。该技术也可用于航天器上实时测量交会对接时的相对位姿参数。     

江汉平原上空QTEC变化特征的统计分析

提出了一种观测台网用多接收机性能一致性的标定方法，并利用江汉平原GPS接收台网的观测数据，分析了该地区上空QTEC的日变化、季节变化、年变化和逐年变化的统计特征．标定结果表明，不同接收机之间的仪器偏差是从双频GPS卫星信标推算QTEC的主要误差来源之一，必须校正．统计分析证实，江汉平原上空QTEC的日变化特征同时受电离层和等离子层控制，其年变化以半年周期为主，峰值和谷值分别出现在两分点和两至点附近，QTEC值的逐年变化从太阳活动峰年到低年逐年下降，与以太阳黑子数为代表的太阳活动密切相关．     

响应矩阵分析方法在BEPC储存环上的应用

由于储存环中各种元件误差的存在, 机器的实际运行模式与设计模式有一定的偏差. 目前广泛开展的响应矩阵方法研究, 可以分析出磁铁元件以及束流位置测量元件的误差, 使束流基本参数得到校正. 介绍了用响应矩阵分析方法, 在BEPC储存环上进行的局部轨道校正的实验研究, 以及BEPC储存环束流参数校正的模拟研究.     

X光底片在位相对标定

本文描述了X光底片在位相对标定技术。其原理是使X射线谱经阶梯形吸收滤片透射后,对X光底片曝光,测量底片的曝光量。文中给出了标定方法和数据处理方法,而且也给出了在X光激光实验中得到的Kodak AA5底片的特性曲线。     

用最小电离的质子刻度铅–闪烁光纤夹层电磁量能器

研究利用最小电离的质子和已知能量的电子来刻度铅–闪烁光纤夹层电磁量能器.对最小电离粒子输出响应进行光纤衰减修正后,利用最小电离质子的输出响应对量能器测量单元进行标定,然后对不同入射能量的电子事例进行能量重建,重建能量与入射能量有很好的线性关系.本文还对最小电离的质子与μ子对量能器测量单元的输出响应进行了比较,发现二者在误差范围内是一致的.     

Implementation and experimental study on fast object modeling based on multiple structured stripes

In this paper, a practical structured light-based system for fast object modeling and reconstruction is reported. The system consists of an off-the-shelf digital projector, a video camera and a turntable. The system calibration is implemented accurately and automatically by taking a single image of an illuminated calibration template. The multiple color light stripes emitted by the projector adopt only three colors and the color can be modified easily according to the surface texture of the object. This makes the system widely applicable in many situations, and the assumption about color neutrality, which is a limitation to other similar systems, can be largely relaxed. The registration and merging algorithm is greatly simplified by employing a turntable. The validity and high accuracy of the method are demonstrated by extensive real experiments.